Fan, Pad Evaporative Cooling System

Air Circulation Fan

We fabricate qualitative range of Fan, Pad Evaporative Cooling System. It is used to cool the air by using the heat present in the air and evaporate the water from an adjacent surface of the pad. In order to obtain better results, the relative distance between cooling pad and fans of the green house should be not more than 50mtrs.

Salient features of Fan, Pad Evaporative Cooling System:

Fan housing made of heavy galvanized sheet
Stainless Steel Blades
Shutters are made of pressed galvanized sheet for highest strength
Central hub and v-belt pulley are made from die-cast aluminum’s
Welded wire guards divided into 2 parts ensure easy maintenance
Propeller is statically and dynamically balanced
Shutter is opened by rotating centrifugal system
Shutter opening is not affected of dust on shutter blades
A powerful couple of springs keep the shutters firmly closed when the fan is not operating

Evaporative Cooling Pad:

The Evaporative cooling pads are made from a specially formulated cellulose paper, impregnated with insoluble anti-riot salts, stiffening saturates and wetting agents to provide maximum cooling.  It can be used for many different cooling purposes but is particularly suitable for cooling of livestock buildings and greenhouses.

This cooling pad consists of specially impregnated and corrugated cellulose paper sheets with different flute angles, one steep (60 degree) and one flat (30 degree) that have been bonded together.  This unique design yields a cooling pad with high evaporation efficiency while still operating with a very low pressure drop.  In addition scaling is kept to a minimum and no water carryover occurs due to the fact that the water is directed to the air inlet side of the pad.  This is where most of the evaporation takes place.  The impregnation procedure for the cellulose paper ensures a strong self-supporting product, with high absorbance, which is protected against decomposition and rotting and therefore increasing longevity.

The distribution pad constitutes a vital part of a complete system and should always be ordered in combination with Cooling Pad placed on top of the cooling Pad it ensures a uniform supply of the water to the cooling pad and minimizes the risk of dry spots.

Features:

High evaporation efficiency.
Superb wetting properties
Low pressure drop when wet, leading to low operation cost.
No water carries over
Low scaling
Self-Cleaning
Strong and self-supporting
Long life time
Low running cost
Quick and easy to install
Environmentally friendly
Consist high quality

Pad Technical Specification:

Specifications Value
Standard Height 1000mm, 1500mm, 1800mm, 2000mm
Standard Width 600mm
Standard Depth 50mm, 100mm, 150mm, 200mm and 300mm

 

Fan,Pad Evaporative Cooling System Manufacturer