Adiabatic Cooling Kit/Pre-cooling Of Air Cooled Condensor

VAI’S Evaporative Cooling: Cost-Effective, Efficient, and controllable

The following benefits will become more apparent as your systems runs more efficiently:

Less energy consumption
Releasing of  less greenhouse gasses
Water savings
Cost saving as a result of less energy and water usage

Suitable for

Commercial and industrial air-conditioning
 Refrigeration units
 HVAC units

During the hot weather months units are under constant pressure to circulate enough cool air to the area where it is needed. Put simply when air temperature increases, electricity consumption in air-conditioning units increases substantially and in addition to this process the cooling capacity of the air-conditioning unit decreases.

This increased load placed on the system results in

Poor performance.
Untimely shutdowns.
Compromised product quality.
Reduction of air-conditioning performance.
Increased electricity consumption.
Severe stress for mechanical parts, shortening the lifespan of the air-conditioning unit itself.
Excessive loads on the condensing coil of the unit from extreme heat causes the eventual shut down of the air-conditioning unit.

By installing a Misting System for Pre-cooling system clients can look forward to

Outside air temperature into the unit is lowered by up to 12°C.
Energy consumption drops, saving electricity and money as much as 30%.
Increases the efficiency of air-conditioning unit as much as 30%.
Reduces system downtime.
Improves occupant comfort level.
Substantially extends the life time of all A/C units.
Environmental benefits – lower consumption kW reducing your carbon footprint.

Installing our unique pre-cooling misting system you can reduce the temperature by up to 12° C, significantly improving the operating performance and efficiency of the air-conditioning units by as much as 30%.

How do we install a Misting System for Pre-Cooling system?

With the use mist nozzles placed in a line in front of the condenser coils to pre-cool the intake air passing through the condenser coils.  When connected to a high pressure misting system pump, water is forced through the specialty nozzles and atomizes the droplets to as small as (5 microns).
Misting systems will produce billions of tiny droplets every second. If these droplets are introduced into an outdoor area, they quickly evaporate. This process of evaporation requires energy to be completed. The energy is taken from the air in the form of heat. The result is a temperature reduction of up to 12 degrees, depending on the ambient temperature and the relative humidity of the air. This method of temperature reduction is the most common use for all misting systems.

The cooler air passed across the condenser coil improves the heat transfer efficiency; the unit does not need the same amount of power to run.

 

Misting Systems - Manufacturers of Mist Cooling Systems, Misting Fan, Misting Ring, Misting Spray Nozzles, High Pressure Misting Systems & Misting Pump